Click to enlarge
Previous product
SIMAX3D® Removal Spatula Cable Cutting Side Snips Nipper Hand Tweezers Tools Stainless Steel Blade for 3D Printer €1,69
Back to products
Next product
Anet® 220x220x3mm 120W 12V MK3 Aluminum Board PCB Heated Bed With Wire For 3D Printer €15,65

BIGTREETECH® 3D Printer Part3D Touch V3.0 Auto Heated Bed Leveling Sensor Kit with Pinboard A+ISP Pinboard for Ender-3

€31,43

Intruduction:This is a kit with 3D Printer3D Touch. It can suit for Creality 3D ender-3 3d priter. Also can suit for other printer. Good at leveling hotbedFeatures:It is an auto leveling sensor for 3D Printer based on open-sourceSimple, high-quality, smart and preciseStable characteristics, high reliabilityFunction of auto leveling is adopted to make it easier to use and to increase the success rate of shapingUsed for Creality 3D Ender 3/Ender 3 Pro/Ender 5/CR-10/ CR-10S/S4/S5 CR20/20Pro.(Creality V1 Firmware Parts conclude the V2Specifications:Voltage: 5VCurrent: 15mAMaximum(Peak) Current: 300mACase Material: Polycarbonat(PC)PCBSoldering: RoHS, Lead Free (Pb Free)Kits Included:1 x BLTouch V3.01 x Connector1 x Tie1 x Rack2 x M3X81 x Pinboard A2 x M3X61 x ISP Pinboard1 x Burner

Compare
Add to wishlist
SKU: 1579480 Categoría: Etiqueta:
Descripción

Intruduction:This is a kit with 3D Printer3D Touch. It can suit for Creality 3D ender-3 3d priter. Also can suit for other printer. Good at leveling hotbedFeatures:It is an auto leveling sensor for 3D Printer based on open-sourceSimple, high-quality, smart and preciseStable characteristics, high reliabilityFunction of auto leveling is adopted to make it easier to use and to increase the success rate of shapingUsed for Creality 3D Ender 3/Ender 3 Pro/Ender 5/CR-10/ CR-10S/S4/S5 CR20/20Pro.(Creality V1 Firmware Parts conclude the V2Specifications:Voltage: 5VCurrent: 15mAMaximum(Peak) Current: 300mACase Material: Polycarbonat(PC)PCBSoldering: RoHS, Lead Free (Pb Free)Kits Included:1 x BLTouch V3.01 x Connector1 x Tie1 x Rack2 x M3X81 x Pinboard A2 x M3X61 x ISP Pinboard1 x Burner

Envío y Entrega

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Productos relacionados

Compare
Close

235*235mm Hot Bed Platform Pure Black Heated Bed Sticker for 3D Printer

€3,63
Overview:- Working Temperature: 80-100℃- Best Compatible Printing Material: PLA- Surface frosted, Can be Reused- Please confirm the sticker fits the platform perfectly before you stick it- Please clean the Glue Residue on the Hot bed before you stick the sticker on itPackage Included:1x 235*235mm Hot Bed Black Sticker
Add to wishlist
Ir a Banggood
Quick view
Compare
Close

Creality 3D® 24V Extruder Hot End Kit For CR-10S Pro 3D Printer Part

€37,52
the CR-10S pro boasts Capricorn Teflon tubingpossibly the best option for smoother filament feeding. Due to its high lubricity and high-temperature resistance, it improves the printing quality and accuracy.Description:Material: AluminumStainless SteelBrassInstallation type: external thread connectionScope of application: 3D printerNozzle size: 0.4mmFeatures:Tip of the nozzle, aluminum heating block, Throat pipe (built-in Teflon).Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 24V .Package included:1x CR-10S Pro Extruder Hot End Kit
Add to wishlist
Ir a Banggood
Quick view
Compare
Close

TWO TREES® 2Pcs KFL Series Lead Screw Zinc Alloy Bore Ball Bearing Pillow Block Mounted for 3D Printer

€3,39
nullZinc Alloy Bearing Units (KFL series) Item No. : Pillow Block Bearing Material: Housing : Zinc Alloy Bearing : Bearing Steel Innear Size : 8mm/10mm/12mmPackage Included:2* Bearings
Add to wishlist
Ir a Banggood
Quick view
Compare
Close

250*250*0.8mm Polyetherimide PEI Sheet With 3M Backing Glue For 3D Printer Heated Bed

€10,31
Specifications:Material: PolyetherimideColor: Black/ White/ TransparentSize:250*250*0.8mmFeatures:1. PEI (Polyetherimide) sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion.2. PEI (polyetherimide) is amber transparent solid, any additives of PEI particle images do not add have low inherent flame retardancy and smoke, the oxygen index of 47% combustion of UL94-V-0 grade, the density is 1.28~1.42g/cm3.3. High temperature stability, even if it is non reinforced PEI, it still has good toughness and strength.4. It has excellent mechanical properties, radiation resistance, high and low temperature resistance and wear resistance, and can also be transmitted through microwave.5. Good flame retardancy, chemical resistance and electrical insulation characteristics.How to Use:1. Special note - Please remove both sides of the teal colored protective film before using.2. There are two methods to attaching the PEI to your print bed.The first method is to just clamp the sheet to the print bed using binder clips. We find that 2 on each side works great.The second method, get 3M 468MP Transfer Tape and use it to stick the PEI to the print bed.3. Once the PEI sheet is attached, re-level your print bed and you are ready to go!4. It helps to wipe the surface down with isopropyl alcohol, methyl alcohol, or soap in between prints. This will
Add to wishlist
Ir a Banggood
Quick view
Compare
Close

TFT32 Full Color LCD Pantalla táctil + MKS-GEN L Placa base con 5Pcs Rojo A4988 Controlador 3D Printer Board Board Kit

€54,92
Acerca MKS-Tablero GEN: 1, ensamble 2560 y ramps1.4 en una placa para resolver el problema de la interfaz compleja y la falla fácil de la interfaz Ramps1.4.2. Unidad de motor reemplazable, soporte 4988 unidad y 8825 unidad, unidad TMC2100, unidad s1093, Señal de unidad externa reservada, se puede conectar a la unidad externa para controlar 57, 86 motores.4, el uso de tubo MOSFET de alta calidad, la disipación de calor mejor, para garantizar la estabilidad a largo plazo.5, el uso de chip de potencia dedicada, soporte de entrada de alimentación de 12V-24V, para resolver el calentamiento del chip de conversión de voltaje de rampas, problema de suministro de alimentación inadecuada.6, entrada de 24V puede ser aceptado. Bajo la misma potencia del sistema, la corriente del lecho caliente puede reducirse a 1/4, resolviendo efectivamente el problema del calentamiento de la tubería de calor MOS.7, El uso de firmware de código abierto Marlin, configuración y rampas 1.4 exactamente iguales, puede reemplazar directamente Ramps1.4.8, se puede conectar directamente a la pantalla de 2004LCD y pantalla 12864LCD, puede admitir TFT28, pantalla táctil TFT32.9. Reserve el puerto de salida del pulso del motor y la dirección para facilitar que la alta corriente externa se conecte a un circuito de accionamiento del motor de corriente grande (como 2A, 5A).10. Conserve las interfaces Servos, AUX-1 y AUX-2 en Rampas 1.4, proporcionando tres salidas 5V y tres interfaces de salida de 12V. Acerca de TFT3
Add to wishlist
Ir a Banggood
Quick view
Compare
Close

Creality 3D® 24V 40W 6X20mm Stainless Steel Single Head Cartridge Heater Heating Tube For 3D Printer Part

€3,90
Description:Single-head Cartridge Heater used to the heating medium which cant work in the connection on both ends, is widely used in mould heating, hot core box, shoot core machine etc.Specifications:Voltage: 24VPower: 40WProduct size: 6X20mmProduct color: RedType: Cartridge HeaterHeater Material: Stainless Steel (304)Wire Length: 600mmWith terminal (3.96-2P)Package Included:1x Creality 3D Cartridge Heater
Add to wishlist
Ir a Banggood
Quick view
Compare
Close

TWO TREES® 10Pcs Flange Bearing Deep Groove Pulley Wheel Aluminum Alloy For 3D Printer

€4,24
nullFeatures:- Selection of Chrome Metal Material, good quality, long life- Smooth Operation,high accuracy- Ideal for international Brand InsteadSpecifications:- Type A: F623zz(3*10*4mm)- Type B: F624zz(4*15*5mm)- Type C: F604ZZ(4*13*4mm)- Type D: F625ZZ(5*18*5mm)- Type E: F688ZZ(8*16*5mm)- Type F: F608ZZ(8*22*7mm)- Type G: F626ZZ(6*19*6mm)Package Included:10Pcs * Bearings (Please choose the size you need)
Add to wishlist
Ir a Banggood
Quick view
Compare
Close

4010 Hot End Blower Fan 12V + M5 Screw Nut Kit + PTFE Tube 1M + 8×25 Blue Spring DIY Kit for 3D Printer

€6,23
Description:An Accessories Kit Includes Common parts that Compatible with most 3D PrintersPackage Included:1 x 4010 Hot End Blower Fan 12V1 x PTFE tube 1m4 x 8*25 Blue Spring4 x M5 Screw and Nut Kit
Add to wishlist
Ir a Banggood
Quick view